Disposable Lab Coveralls

 

Disposable lab coverall is a one-piece protective clothing made of lightweight materials (such as polypropylene, SMS non-woven fabrics, PE coating materials, etc.) to prevent liquids, dust, microorganisms, chemical splashes, etc. from causing pollution to the human body.

 

 

Good Breathability
The MVTR value (water vapor transmission rate) of disposable lab coveralls is as high as 7500g/m²/24h, which is 5 times that of ordinary polyethylene protective clothing (1500g/m²/24h). The breathability reaches 40 cm³/cm²/s, which is 100% higher than traditional protective clothing. This ensures that the wearer's body temperature rise does not exceed 0.5°C during 8 hours of continuous work, which is significantly lower than the 1.5°C body temperature rise of ordinary protective clothing.

 

Good Protective Effect
Our disposable lab coverall adopts a three-layer Spunbond-Meltblown-Spunbond structure. Among them, the fiber diameter of the middle meltblown layer is only 1-3 microns, forming a tight filtration barrier. Therefore, our protective clothing has a protection efficiency of 99.9% against blood and body fluids, far exceeding the 95% protection rate of ordinary medical masks. It also has a filtration efficiency (PFE) of 98.9% for 0.1 micron particles and a filtration efficiency of 99.7% for 0.3 micron particles.

 

Good Anti-static Property
The surface of the disposable lab coverall has been treated with anti-static treatment, and the surface resistivity is controlled at 1x10⁸ Ω/sq, which is better than the 5x10¹⁰ Ω/sq required by the EN 1149-5 standard. At 50% relative humidity, the static decay time is less than 0.01 seconds, while ordinary protective clothing requires 0.5-1 seconds. This means that our protective clothing can also quickly release static electricity in a dry environment, reducing the risk of sparks.

 

Chemical Resistance To Penetration
The disposable lab coverall uses anti-penetration coating technology. According to the EN ISO 6529 test, the penetration time of the protective clothing for 98% sulfuric acid is more than 480 minutes (8 hours), which is 16 times the standard requirement of 30 minutes. Moreover, the protective clothing has an anti-penetration performance of level 3 (more than 60 minutes) against 70% isopropyl alcohol, while ordinary protective clothing can usually only reach level 1 (10 minutes).

 

 

Place of Origin: Hubei, China (Mainland)

Sample Fee: Free of charge

HS Code: 6210103010

Production Capacity: 10,000 pieces per day

MOQ: 10,000 pieces (trial orders accepted)

Standard: CE certified

Shipping Terms: All Incoterms 2000 available

Material: PP non-woven + laminated microporous PE film

Color: White

 

 

Disposable Microporous Coverall

Latex-free and fiberglass-free, lightweight, and breathable

Material: PP non-woven + laminated microporous PE film (50–65gsm)

Sizes: M, L, XL, XXL, XXXL

Color: White

Packing: 1 piece/bag, 50 bags/carton

Style options:

Hood: With or without

Foot cover: With or without

Zipper front

Elastic at wrists, cuffs, and ankles

 

Hot Tags: disposable lab coveralls, China disposable lab coveralls manufacturers, suppliers, factory